Single phase � smart electricity meter (PCR421)
The PCR421 in a powerful single-phase Smart Electricity Meter built for residential applications. The meter combines advanced metering technology, state-of-the-art communications, and internal relay unit, all integrated and sealed in a single housing. The integrated solution allows Powercom to offer a real time AMI solution with two way communication. It enables reading, controlling and interfacing other sensors or meters. Using open protocols enables the PCR421 collect information from any 3rd party meter/sensor manufacturers. The meter supports renewable Energy sources (PV and Wind). The meter is approved according to IEC62052-11, IEC 62053-21 and ISO 9001.

 Download file

Smart Grid Concentrator (PCCG340)
The new Concentrator (DCU � Data Collecting Unit) manages up to 2000 Electricity Meters and includes mass memory which holds up to three months of all meter readings. The Concentrator acts as a smart gateway between the Electricity Meters and the Central Office Software (MDM � Meter Data management). The Concentrator support multi communication protocols and multiple communication methods (Serial Interface, USB, LAN-TCP/IP, PLC, GPRS and IR). The Concentrator firmware supports remote upgrade and performs manual and automatic tasks, predefined in the central software. The Concentrator supports Multi-Utility metering end points as Water, Gas, Heat, Electricity, and Control.

 Download file

Polyphase smart electricity meter (PCR423)
The PCR423 Series Polyphase Smart Electricity Meter is an intelligent node of Smart Grid, designed to meet the needs of residential, commercial and industrial three phase energy consumers. PCR423 integrates multi-communication and control methods. It performs precise energy measurement, remote control, load detection, the user application control, Multi utility for water and gas meters, User energy consumption display and management functions. Volt/VAR real time mesurement.

 Download file

Polyphase GPRS/LAN smart electricity meter (PCR423G/L)
The PCR423 Series Polyphase Smart Electricity Meter is an intelligent node of Smart Grid, designed to meet the needs of residential, commercial and industrial three phase energy consumers. PCR423 integrates GPRS/LAN (TCP/IP) communication modules. It performs precise energy measurement, remote control, load detection, the user application control, Multi utility for water and gas meters, User energy consumption display and management functions. Volt/VAR real time measurement.

 Download file

Plugable Single Phase Meter - Residential (SCR521)

AMI � DIN RAIL LOAD CONTROL DEVICES(APM/APR)
The APM/APR DIN Rail units are used as appliance (load) control devices. The units are a part of Powercom AMI solution, allowing the Utilities or the customers to control the major appliances at the customer premises (as Geyser, swimming pool pump, etc.). The units are activated by the master AMI system (through the “Smart Meter� or by serial control interface). The APM/APR units include internal relay (16A-60A), serial communication interface (RS485) and Radio Frequency. The APM unit includes metering capability offering information as Energy consumption, Voltage, Current, PF. A real time clock (RTC) enables scheduled connect/ disconnect functionality. The APM/APR are perfect for use of “Smart Home Applications� and Industrial control application.

 Download file

In House Display Unit-CIU (IHD7RF)
Display unit to monitor and control energy use (Electricity, Water, Gas, Heating, and Appliances). The unit offers smart home applications connecting sensors (Breaking, Smoke, Fire, and Emergency). The unit consist RF communication and allows mobility within the house. All readings are monitored and stored within the unit, allowing the customer to get report on the historical and current consumption profiles. The unit allows the utility company to send customer with useful information or messages. The display stores all tariff tables and calculates cost per hour and customer spending. This smart home unit provides an excellent tool to achieve energy saving and shift demand response for the residential sector.

KY121User Interface Unit (UIU)
The KY121 is a smart customer interface unit (CIU). The KY121 is an integrated part of Powercom AMI "Smart Grid" solution. The unit is located in the customer's premises and communicates with the customer meter. It displays the customer a range of information as consumption, demand data, rate of consumption. The customer can initiate communication back to the meter. Most common application will be prepayment token download to the meter. The unit is capable to store the data and present it to the customer to result Energy Conservation.

 Download file

Low Voltage Concentrator(PCCG330)
The Concentrator manages the smart meters over the power line network and provides the connectivity infrastructure between meters to the central office software. The Concentrator can support up to 1024 meters and serves as a backup memory to all system elements. The Concentrator support multi communication (RF, Serial, TCP/IP, PLC, and IR) and communicates with the central office software using encrypted GPRS network.

Single Phase Meter (PCR321)
Single Phase Energy meter used for Residential and small commercial consumers. The meter consist Powercom’s Dynamic PLC� technology with two way communications. Built in power relay allows remote connect/disconnect. Software control commands can set the meter as credit or prepayment. The meter offers several ways to read, store, control and manage energy information. The meter detects outage, theft and tampering, and provides smart management services as load limitation and load control.

 Download file

Poly Phase Meter (PCR323)
Three Phase Energy meter used for Residential and small commercial consumers. The meter consist Powercom’s Dynamic PLC� technology with two way communications. Built in power relay allows remote connect/disconnect. Software control commands can set the meter as credit or prepayment. The meter offers several ways to read, store, control and manage energy information. The meter detects outage, theft and tampering, and provides smart management services as load limitation and load control.

 Download file

Handle Unit (HT-2680A)
An Infrared terminal allows communication with any Concentrator or smart meter through IR port. Running local software, it can set, read and activate any function in the units. All functionality is available for local on site users.

RS485/PLC Unit (RSPLC51)
The unit converts from serial to PLC communication. Taking advantage of Powercom Dynamic PLC� technology, it allows usage of the existing power line cables to enable real time, reliable communication. The unit offers a perfect solution for light control systems, energy efficiency and energy control applications.

 Download file